ETS Sunvision Elite 48V, Owner'S Manual

Page: 7 / 40

26851-01A
2
Installation - Pre-Installation Planning
Pre-Installation Planning
Before you begin to assemble your booth, you should observe the following consid-
erations.
WARNING
Shock hazard.
Disconnect power before
servicing.
Air from the room is used to cool
the unit. Maximum ambient room
temperature should be 80°F. Place
your booth no closer than 6” from
any wall. Make sure nothing
obstructs the airflow into or out of
the fan openings. A poorly ventilated
room may cause the unit to become
hot and cause discomfort to the
user.
CAUTION
Use of a voltage source above 230V
AC may prevent proper operation of
the booth and could cause damage
and void the warranty.
CAUTION
Proper assembly of your booth
requires two people. Plan to have a
helper or two assist you.
CAUTION
• The SUNVISION Elite™ 48V oper-
ates from a 220V AC power source.
The unit should be hardwired direct-
ly to a junction box on a dedicated
circuit capable of providing
60 Amp
service. We recommend connection
by a professional electrician.
• IMPORTANT! Voltage must be below
230V AC or may require a Buck
Booster.