ETS Sunvision Elite 48V, Owner'S Manual

Page: 25 / 40

26851-01A
20
Installation - Remote Connections
Remote Connections
Your tanning booth incorporates advanced
circuitry allowing it to connect and commu-
nicate with most remote control systems. If a
remote system is to be used, first determine
whether the remote system is a T-Max®
System or a standard remote system operating
with a control relay. Follow the appropriate
instructions for your system type.
T-Max® Products
The T-Max® remote systems offer the ultimate
in sunbed control, while allowing the tanner
easy straightforward operation. Your booth is
configured to directly connect to this system.
The circuitry inside your booth eliminates the
need for the T-Max® 1A or 3A when connect-
ing to the T-Max® Manager series. Your booth
supports the auto addressing feature of the lat-
est T-Max® Manager models and the following
parameters: 2, 5, 6, 7, 8, 9, 10, 14, and 15. See
your T-Max® manual for descriptions of these
parameters and how they function.
T-Max® Manager Remote System
This system is ideal for multiple sunbed instal-
lations. Simply connect the RJ-22 modular
cable(s), described in the T-Max® Manager
manual, into the remote port(s) located on the
back of your booth and follow the instructions
that came with your remote system, noting
fig-
ure 1 . If you have an older T-Max® Manager
that doesn’t support auto addressing,
set the address, or “id”, of each unit
manually as described in
Setting the
address manually . You can place your
booth at any location in the series.
figure 1
NOTE: A T-Max® 1A
can be substituted for
the 3A in figure 1 .
CAUTION
The remote connection is not designed to supply
or accept high voltage, nor can it provide power
to an external timer. The booth’s remote inter-
face circuitry operates on 5 volts, attempting to
connect it to any higher voltages will damage the
unit as well as void your warranty.
Go straight to the source with all your T-
Max® brand remote questions:
(417) 338-5101