8 - Legend 548 Assembly and User Manual
30068-02A
Remove the bench and canopy acrylics.
The bench acrylic is secured by (2) 1/4-
20x1” Phillips screws at the front corners.
Remove the screws and simply raise the
acrylic slightly and pull free of the alumi-
num channel at the back.
Five captive screws across the front of the
canopy hold the canopy acrylic in place.
Loosen these screws and the front channel
will swing down. The screws will remain in
the channel. Swing the channel down farther
to release the acrylic and lower the acrylic
to clear the handle.
Attached to the canopy acrylic are 2 exciters
(speakers). Disconnect the white connector
on the wiring harness running from these
exciters into the bed.
Now lift the acrylic from the back channel.
