6 - Legend 548 Assembly and User Manual
30068-02A
Unpacking and inspection
Your new tanning bed arrives completely
assembled. The reason for this is to assure
everything has been tested at the factory. Be-
fore performing any work, inspect the unit
carefully and identify any issues that may
have happened during shipping. Notify the
transportation company immediately to re-
port any shipping damage.
Record the serial number of the unit in the
area provided at the back of this manual.
This information will be required whenever
you call customer service.
Pre-installation Planning
The following instructions outline a com-
plete disassembly and reassembly. Prepare
an area for disassembly to place items prior
to installation in the
fi
nal space.
No hardware has been provided as the hard-
ware needed will be removed during the
disassembly process. Be sure to keep track
of all hardware removed.
Electrical Requirements
You are responsible for preparing the facility
for your tanning bed. Please have an electri-
cian present at the time your tanning bed is
installed. That way the installation crew can
fully verify all functions before they leave.
This unit runs on 220VAC service and must
be hardwired directly to a junction box on a
dedicated circuit.
A professional electrician
is recommended for electrical installation.
This unit requires a minimum 40A cir-
cuit breaker on a 3-phase line (3 wire plus
ground). Alternatively, it requires a minimum
60A circuit breaker on a single phase line (2
wire plus ground). See page 32.
Proper assembly of your sunbed
requires 3-4 people. Plan to have
some helpers assist you.
CAUTION
DO NOT lift the unit using the plastic
endcaps. They are not designed to
hold the weight of the unit and may
break, causing damage to the unit and
possible injury.
CAUTION
Air from the room is used to cool the
sunbed. Maximum ambient room tem-
perature should be 80°F. Place your
sunbed no closer than 6” from any
wall. Make sure nothing obstructs the
air
fl
ow into or out of the fan openings.
A poorly ventilated room may cause
the unit to become hot and cause dis-
comfort to the user.
CAUTION
Voltage must be between 215-245 AC
(loaded) or may require a buck-boost-
er for proper operation. Excessively
high voltage could cause damage and
void the warranty.
CAUTION
