Etisalat Travel Router, User Manual

Page: 33 / 38

33
Etisalat Travel Router USER GUIDE
Trouble Shooting
4. Can not remember your encryption key. What should
you do?
If you forgot your encryption key, the Wireless device will
not be able to establish a connection to your Travel Router.
To reset the encryption key(s), login to the Travel Router
web configuration using an Ethernet connection.
5. How do you reset your Travel Router to its factory
default settings?
To factory reset the Travel Router to its factory default
settings, follow the steps listed below:
• Ensure that the router is powered on (for at least 1
minute).
• Press the reset button for at least ten seconds and release.
At this point, the reset is in progress. Do not power off
the unit at this point.
• After your Travel Router reboots, the default settings are
now restored. This entire process takes several minutes
to complete.
• Once you have reset the router to its default settings
you will be able to access the device’s web configuration
using http://192.168.20.1 with username/password of
“admin”.
6. What you can do if the Ethernet cable does not work
properly
• The Travel Router’s Ethernet port is a WAN port by
default, simply press the reset button down for one
second for the WAN port to switch to become a LAN
port.
• Ensure that there is a solid cable connection between
the Ethernet port on the Travel Router, and your NIC
(Network Interface Card).
• Check that the settings on your network adapter are
“Enabled,” and set to accept an IP address from the DHCP
(Please refer to the Computer Hardware Configuration
section in this manual for additional information).
• If all settings appear to be correct, ensure that you
are not using a crossover Ethernet cable. Although the
Travel Router is MDI/MDIX compatible, not all NIC are.
Therefore, it is recommended that you use a straight
through Ethernet cable when possible.
7. What you can do when your Travel Router has no
power
• Plug in the power adapter provided to recharge your
battery
Note: You can still use the Travel Router with no battery power, as long as the
power adapter is plugged in.