Etisalat Travel Router, User Manual

Page: 17 / 38

17
Etisalat Travel Router USER GUIDE
Advanced
Advanced Routing
This page allows you to configure static and dynamic routing rules for your Travel Router.
ADVANCED ROUTING – STATIC
Static Routing allows computers that are connected to your Travel Router to communicate
with computers on another LAN segment which are connected to it via another router. To
set a rule, you need to specify the following:
• Destination
• Netmask (if applicable - select the “Net” range as the route type)
• Gateway
• Interface
ADVANCED ROUTING – DYNAMIC
Dynamic Routing uses the RIP protocol to allow the Travel Router to adapt to changes in
the network. RIP enables the device to determine the best route for each packet based on
the “hop count” or number of hops between Source and Destination. To enable Dynamic
Routing, select Enable from the dropbox and click Apply.
DHCP Client
This page allows you to view the current DHCP clients connected to your Travel Router.