Eternus DX60 User Manual Download

Page: 144 / 241

Chapter 7 Setup
>

7.2 Basic Setup

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

144

P3AM-3042-07ENZ0

Modify the FC Port Mode. (Only for ETERNUS DX90)

Change the port mode of the Fibre Channel port (Channel Adapter (CA) or Remote
Adapter (RA)).

5-1

Set the "Port Mode(After)" to the appropriate port mode, and click the [Next >] button.

Figure 7.6

[Modify FC Port Mode] screen

A confirmation screen appears.

5-2

Click the [OK] button.
The port mode is set, and the [Port Parameter Settings] screen appears.

Set Port Parameters.

Set the connecting information for the port.
Setting screens will vary depending on the ETERNUS DX60/DX80/DX90 model.

IMPORTANT

•

Select "CA" when using the port to connect to the server.
Select "RA" when using the port for REC.

•

If the port mode is changed from "CA" to "RA", the LUN
mapping information for the target CA port will be deleted.

•

If the port mode is changed from "RA" to "CA", the Advanced
Copy path information specified for the target FC port will be
deleted.

IMPORTANT

When using the Host Affinity functions, make sure to "Enable" the
Host Affinity setting of the port.
Refer to

"1.3.7 Security Functions" (page 46)

for details about the

Host Affinity functions.

Summary of Contents for DX60

















































































































































































































































Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands

Eternus DX60, User Manual

Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands