Eternus DX60 User Manual Download

Page: 201 / 241

Chapter 8 Installing Optional Products
>

8.2 Drive Enclosure Installation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

201

P3AM-3042-07ENZ0

Check the drive enclosure's AUTO POWER switch is OFF, and click the [Next >]
button.

Figure 8.5

[Add Drive Enclosure] - Workflow Sequence screen 2

The expansion completion screen is displayed.

Click the [OK] button.

The [Add Drive Enclosure] screen is closed.

For 2.5" type drive enclosures, attach the supplied flange cover.

For details on how to attach the flange cover, refer to

"3.4 Attaching and Removing the

Flange Cover" (page 78)

On the Storage System Status screen, check that the added drive enclosures
have been recognized.

Install the disks.

Refer to

"8.1.4 Additional Disk Installation Procedure" (page 186)

for the appropriate

procedure.

Remove the wrist strap.

For 3.5" type drive enclosures, attach the front cover.

For details on how to attach the front cover, refer to

"3.3 Attaching and Removing the Front

Cover" (page 75)

End of procedure

Summary of Contents for DX60

















































































































































































































































Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands

Eternus DX60, User Manual

Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands