Eternus DX60 User Manual Download

Page: 186 / 241

Chapter 8 Installing Optional Products
>

8.1 Disk Installation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

186

P3AM-3042-07ENZ0

8.1.3

Disk Installation Positions

This section explains the disk installation positions.

•

3.5" disks
3.5" disks can be installed in the front of the 3.5" type controller enclosure or 3.5" type drive
enclosure, as shown in

Figure 8.1

Position of 3.5" disk slots

•

2.5" disks
2.5" disks can be installed in the front of the 2.5" type controller enclosure or 2.5" type drive
enclosure, as shown in

Figure 8.2

Position of 2.5" disk slots

8.1.4

Additional Disk Installation Procedure

This section describes how to install additional disks in the ETERNUS DX60/DX80/DX90.

Slot#0

Slot#4

Slot#8

Slot#1

Slot#5

Slot#9

Slot#2

Slot#6

Slot#10

Slot#3

Slot#7

Slot#11

Slot#8

Slot#9

Slot#10

Slot#1

Slot#12

Slot#13

Slot#14

Slot#15

Slot#0

Slot#1

Slot#2

Slot#3

Slot#4

Slot#5

Slot#6

Slot#7

Slot#16

Slot#17

Slot#18

Slot#19

Slot#20

Slot#21

Slot#22

Slot#23

WARNING

Do Not

•

Do not install any disks that are not FUJITSU authorized, as they
may damage the device and/or cause fire or electrical shock.

•

Do not damage or modify the internal cables or ETERNUS DX60/
DX80/DX90 when installing the disks, as this may damage the
device and/or cause fire or electrical shock.

•

Do not remove system disks. Doing so will render the ETERNUS
DX60/DX80/DX90 unusable.

CAUTION

•

If additional disks are installed in a way other as described herein,
damage and/or device failure or electrical shock may occur.

Summary of Contents for DX60

















































































































































































































































Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands

Eternus DX60, User Manual

Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands