Eternus DX60 User Manual Download

Page: 176 / 241

Chapter 7 Setup
>

7.4 Monitoring Setup

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

176

P3AM-3042-07ENZ0

2-3

Enter a new destination for the SNMP Trap, and click the [Add New Destination] button.

Enter the IP address of the ServerView management device (SNMP Manager) in
"IP Address".

Enter the Community name to transfer the SNMP Trap to (if not specified, "public" is
used) in "Community Name".

Figure 7.38 [Trap] screen

The new destination for the SNMP is added in the "Set Destination of SNMP Traps"
field.

2-4

Click the [Set] button.
A confirmation screen appears.

2-5

Click the [OK] button.
The settings are reflected.

Download the MIB definition file for SeverView monitoring.

Export the MIB definition file for ServerView monitoring (FJDARY-E60.MIB) in the
ETERNUS DX60/DX80/DX90.

3-1

Click the [Download MIB File] under the [Network Settings] menu on the [Global
Settings] tab in the GUI screen.
The [Download MIB File] screen appears.

Summary of Contents for DX60

















































































































































































































































Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands

Eternus DX60, User Manual

Search results

Summary of Contents for DX60

Reviews:

Related manuals for DX60

Brands by name

Popular brands