MANUAL SGM800
38
2.1.3
Menu -dAC-
dAC Analog output settings
In this menu, all analog output parameters can be set (only for SGM810 or when the
analog output option is installed) options are:
dAC 1
Set analog output to minimum level
dAC 2
Set analog output to maximum level
dAC 3
Set analog output to level in percetage
dAC 4
Analog output weigher mode
dAC 5
Zero value for minimum analog output
dAC 6
End value for maximum analog output
dAC 7
Analog output range
Press key 2 <2 sec to enter the analog output settings.
The following screen is visible:
In
dAC 1
you can set the
analog output to its minimum level
for testing
purpose.Press key 2 <2 sec to set the analog output to minimum.
Press key 3 <2 sec to go back.
The following screen is visible:
