ETC EchoTouch, User Manual

Page: 40 / 44

36 Showfile Management
File, Save
Save the show by going to Setup>Files>Save .
The show will be saved with the name you last gave it. If you have not yet saved the show with a name, you
will be prompted to enter a show file name.
Caution:
All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the
export function.
File, Save As
Save the show by going to Setup>Files>Save As . The show will be saved with the name you enter.
Note:
The difference between Save and Save As is you will always be asked to name the show file
when you use Save As.
Caution:
All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the
Export function.
File, Import
Import an existing show file by going to Setup>Files>Shows>Import .
Note:
Show files must be saved on a memory stick, in a folder named "Shows" in the root dir-
ectory.
When the Import button is pressed, the following screen will display showing the available show files. Select
the desired file, and then press Accept . If you want to leave this display without importing, press Cancel .
File, Export
Export the current show file by going to Setup>Files>Shows>Export .
Note:
Show files will be saved onto a memory stick, in a folder named "Shows" in the root dir-
ectory.