ETC EchoTouch, User Manual

Page: 42 / 44

38 Showfile Management
Save As Default
The current show will be saved as the default to be used each time Setup> File > New is selected. Typically
this will include a standard patch, but may also include any other show elements.
Caution:
All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the export function.
Remove Default Show
The Default show is removed to a complete blank state with no patch or content at all.
Selecting File > New will start your device with no programmed content at all.
Caution:
All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the export function.
Files, Advanced
Functions
Import Settings - allows you to import a settings file.
Update firmware - updates the device's main operating software.
Install Extras - add or replace data files, such as new device personalities, help texts or languages.
Export Logs - exports the devices's log files to a USB drive.
Caution:
All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the export function.
Import Settings
When a show file is exported , a settings file is also created. This file only contains the settings information selec-
ted in the Settings tabs.This file can be imported using the Import Settings option under Files>Advanced .
Update Firmware
The main operating software can be updated here. The software must be obtained from ETC and placed in the
root of the USB drive. Please make sure the software file is not inside any other folder or subdirectory, as this
will hide it from the update function.
The file name will be in this format: ETC_CS_#.#.#.#.#.#.fw (the software version will replace #.#.#.#.#.#).
Caution:
The update process may take a few minutes. Do not shutdown the device until the pro-
cess has finished. You will be prompted to shutdown and restart after the update.
Install Extras
Data and content supplied by ETC used by your device may be imported here.