ETC EchoTouch, User Manual

Page: 39 / 44

Showfile Management 35
Showfile Management
This section explains how to create , save , open , delete , import , and export show files. Software upgrades and
creating a default show file are also covered.
Files
All filing operations:
New
Open
Save
Save As
Show files:
Save as default
Remove default
Delete
Import
Export
Advanced:
Import Settings
Update Firmware
Install Extras
Export Logs
Caution:
All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the
Export function.
File, New
Start a new show by going to Setup>Files>New .
Note:
You will be warned that this action will clear the memory. Select Yes to clear memory and
start a new show, or No to cancel.
The new show will be based on the template default show , which is customizable.
File, Open
Open an existing show file by going to Setup>Files>Open .
Note:
Show files must be in the device's internal storage before they can be opened here. If the file
is located on a memory stick, you will need to use import first.