ETC EchoTouch, User Manual

Page: 37 / 44

System Settings and Setup 33
Echo Space - assigns the Echo Space used by your touchscreen. An Echo system can support spaces 1
through 16.
Require Setup Passcode - when enabled, the touchscreen requires a four digit passcode be entered to
access the setup options, such as patch and settings.
ShowRecord Button - when disabled, the record button will be hidden.
Login Always Required - A login passcode can also be assigned. This requires a four digit passcode be
entered to access the touchscreen after a period of inactivity or lockout. You can set the period of
inactivity in the
Display tab.
AllowEcho System to Lockout This Station - allows a lockout command from an Echo control system
to affect this device.
ShowEcho Space Lockout Control - displays a button that can be used to lockout other Echo devices
in the shared space.
Settings: Display
From this tab, you can assign inactivity behavior for your touchscreen.
You can assign the amount of inactivity time that needs to pass before the inactivity behavior starts. Inactivity
time can be set to 1 minute, 3 minutes, or 5 minutes.
The following inactivity behaviors can be set:
Dim Screen - dims the touchscreen to an assigned dim percentage level.
ShowInactivity Image - displays a default or an assigned image. You can assign an image by tapping
on Change Image and selecting the desired image from an attached USB drive. The following formats
are supported: jpg, png, tiff, and bmp files. You can also set a dim percentage level for this option.
Screen Off - turns the touchscreen display off.
Tapping the touchscreen will exit out of all of the inactivity behaviors.
Settings: Presets
Sets the default times used for each of the Presets and the Off function. To set the timing used for a specific pre-
set or off button, see
Edit Item for more information.