ETC EchoTouch, User Manual

Page: 25 / 44

Controlling Parameters 21
For lights with fixed ranges of preset colors, such as color wheels or scrollers, use the parameter all tab.
The filmstrip may be scrolled left or right to see all the choices.
Whites
The color picker can be set to either colors or whites. In whites mode, the picker will attempt to match the
shade of white selected. However, the actual shade of white produced will depend on the type of light and its
capabilities.
Use the Nudge function to get the desired shade.
See Parameter, ColorMix for more information.
Record Color Chips
Color chips may be programmed to carry any color mix.
How to Program a Color Chip.
1. Pick a color using the color selector , move around until you find the one you require.
2. Press the Record Chip button.
3. Pick a chip to re-program, or press Cancel to exit without saving.
Note:
Not all lights can produce all colors, and not all lights can match colors accurately, either
between similar models or with other different models. You may find it convenient to make several
similar chips for different lights in order that they all produce a similar color.
Parameter, Beam
Shows only the beam parameters. All parameters that are not position, intensity or color mixing are included in
the beam parameter set.