ETC EchoTouch, User Manual

Page: 21 / 44

Controlling Parameters 17
Controlling Parameters
Depending on the types of lights you have patched, you may have additional parameters that you can control.
Those parameters may include
color , position (focus), beam , and lamp commands .
Parameter
All the controllable features of an automated light, with the exception of the intensity, are known as the para-
meters of the light.
Parameters may include position (pan/tilt), color mix, beam control (iris, focus, et cetera), or lamp controls. The
tabs along the top allows viewing of all parameters or only a selected type. Tabs with additional pages display
with an indicator under the parameter name. Tap on a tab twice to access page two and three times for page
three.
Each cell on the parameter display is a controllable button to alter the value. Press and hold on the cell and you
can wipe the value up and down, using the entire screen height for control.
Press once and release on a cell to reveal a filmstrip-style view of the available settings, with diagrams of gobos
and samples of fixed colors. The strip may be scrolled left-right until the desired setting is found. Pick the set-
ting to close the filmstrip.
Parameter, All
Shows all the available parameters.