ETC Desire D40, User Manual

Page: 27 / 48

Installation and DMX Profiles 23
Vivid, Lustr+, Fire, Ice, Studio HD
DMX
Profile
DMX
Channels
Channel Assignments
Notes
Vivid, Lustr+,
Fire, Ice
Studio HD
Direct 9
1 - Red 1 - Red
Direct control of each individual color
with a separate master intensity
channel. Color calibration of LEDs is
not active in this mode. The nine-
channel profile will produce the
highest quality color cross fades.
2 - Orange
(White if Lustr+)
2 -Orange
3 - Amber 3 -Amber
4 - Green 4 - Green
5 - Cyan 5 - 3200K White
6 - Blue 6 - 5000K White
7 - Indigo 7 - Indigo
8 - Intensity 8 - Intensity
9 - Strobe 9 - Strobe
RGB
5
(Ch. 4 not
used)
1-Red
Effectively addresses all seven colors via
three channels of control. RGB profile
will produce medium quality color
cross-fades
2-Green
3-Blue
4 - n/a
5 - Strobe
HSI 5
1 – Hue (coarse)
High resolution hue (two channels),
saturation, and intensity control.
HSI mode will produce color cross-
fades around the color space.
2 – Hue (fine)
3 - Saturation
4 - Intensity
5- Strobe
HSIC 6
1 – Hue (coarse)
High-resolution hue, saturation, and
intensity control as above, with the
addition of a color point channel to
adjust the color temperature of the
fixture in both white light and color.
Color cross-fade performance is the
same as HSI.
2 – Hue (fine)
3 - Saturation
4 - Intensity
5 - Strobe
6 - Color Point (CCT)
Studio 3
1 – Intensity Controls fixture as a white light unit. If
no DMX is present, (i.e. console input),
a fixture can be adjusted for these 3
parameters on the U/I at the back of
the unit.
2 – Color Point (CCT)
3 - Tint
Additional profile options on following page