16
Desire D40/D60 XTI v1.8.0 User Manual
Installation on a Wall
The Wall Mount Bracket accessory for the D40/D60 XTI fixture provides a stable mounting position for
the fixture, while providing a wire way for a clean and functional installation to walls and other vertical
surfaces.
Refer to the
D40/D60 XTI Wall Mount Installation Instructions.
Power and Data Cabling Requirements
Power
The D40/D60 XTI fixture operates on AC power, 100 to 240VAC/50-60Hz. The fixture must be
connected to a non-dimmable power source in order to avoid damage to its internal power supply and
other electrical components. Dimming will damage the fixture and void the warranty.
The fixture is completely pre-wired at the factory and there is no need for entry into the housing.
Refer to
D40/D60 XTI Installation Instructions
for detailed information about installation.
Data
The D40/D60 XTI fixture operates on a DMX control signal or as a standalone fixture. The fixture is
supplied with cable that includes DMX input and thru. DMX cables should be acceptable for DMX data
transmission (not microphone cable) and should follow the standard pinout. The optional secondary
data pair is not used by the D40/D60 XTI fixtures. The maximum DMX data run from any DMX source
to the last fixture in a chain is 1000 feet (300m).
Use Belden
®
9729, CAT-5e, or equivalent Shielded Twisted Pair (STP) or Unshielded Twisted Pair (UTP)
cable to connect the D40/D60 XTI into an IDC (Insulation Displacement Connector) style connector.
Europe
North America
Mains
Brown
Black
Live
Blue
White
Neutral
Yellow/green
Green
Ground
CAUTION:
The fixture must be grounded and wired in accordance with national, state and local
electrical codes. Failure to do so may result in serious personal injury.
