Quick Start
37
Appendix A
Quick Start
This section will help you to quickly use the Desire XTI Series fixture. For complete, detailed information
and step-by-step instructions, see
Operation
on
page 25
.
Install
Step 1:
Hang or mount the fixture using the provided hardware and approved hardware
accessories.
Step 2:
Attach an approved safety cable.
Step 3:
Install a secondary lens, if needed, with the smooth side out.
Step 4:
Attach additional accessories (half shield, louver, etc.), if needed, onto the fixture.
Focus
Step 1:
Using an RDM configuration tool or DMX/RDM control device, turn the fixture on to full
intensity.
Step 2:
Adjust the fixture's position as needed.
Step 3:
When focusing is complete, return the fixture to normal operation.
Configure
Set DMX Address
Step 1:
Using an RDM configuration tool or RDM lighting control device, set the address of the
fixture.
Quick Setups
Various pre-programmed combinations of operational settings are available to quickly get you started.
These settings are specifically created for different situations and are easily accessible with an RDM
configuration tool or RDM lighting control device.
Quick Setups (Vivid, Lustr+, Fire, Ice, and Studio HD)
Quick Setup
Description
Profile
Features
General
General lighting:
All-purpose settings for most lighting
applications.
The default setup except for fixtures with
Studio LED arrays.
Direct
control
•
Standard dimming curve
•
Regulated output for brightness
consistency
•
Individual color channels plus master
intensity control
•
Allows for native color space crossfades
•
Output is NOT color-calibrated
Stage
Theatrical lighting:
Tungsten-like performance and precise
color-control.
Uses the most DMX channels of all quick
setups.
HSI
Plus 7
enabled
•
Incandescent dimming curve
•
Regulated output for brightness
consistency
•
White point: 3200K
