ETAS
Technical Data
FETK-S2.1 - User’s Guide
33
7
Technical Data
7.1
System Requirements
7.1.1
ETAS Compatible Hardware
ETAS Hardware: ES89x ECU Interface Modules
7.1.2
PC with one Ethernet Interface
A PC with one open Ethernet interface (1 Gbit/s) with RJ-45 connection is
required. Ethernet interfaces that are implemented with an additional network
card in the PC must feature a 32-bit data bus.
7.1.2.1
Requirement to ensure successful Initialization of the Module
To deactivate the power saving mode
Choose in Windows System Control Center / Device Manager / Network
Adapter the used network adapter by double-click. Deactivate the "Allow the
computer to turn off this device to save power" option in the "Power Manage-
ment" register. Confirm your configuration.
The manufacturers of network adapter have different names for this function.
Example:
• "Link down Power saving"
• "Allow the computer to turn off this device to save power"
7.1.3
Software Support
You need following software versions to support the FETK-S2.1:
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!
Microcontroller
HSP
INCA
ETK
Tools
ASCET-RP INTECRIO
MPC5746MED
EMU57EM80xy
V11.8.0
V7.2.8
V4.1.9
V6.4.3
V4.6.2
MPC5746M /
SPC57EM80xy
V11.8.0
V7.2.8
V4.1.9
V6.4.3
V4.6.2
MPC5744K-ED /
EMU574K72xy
V11.8.0
V7.2.8
V4.1.9
V6.4.3
V4.6.2
MPC5744K /
SPC574K72xy
V11.8.0
V7.2.8
V4.1.9
V6.4.3
V4.6.2
MPC5777A-ED /
EMU57HM90xy
V11.8.0
V7.2.8
V4.1.9
V6.4.3
V4.6.2
MPC5777A /
SPC57HM90xy
V11.8.0
V7.2.8
V4.1.9
V6.4.3
V4.6.2
