background image

ETAS

Basic Safety Notices

FETK-S2.1 - User’s Guide

14

2.5

Taking the Product Back and Recycling

The European Union has passed a directive called Waste Electrical and Elec-
tronic Equipment, or WEEE for short, to ensure that systems are setup through-
out the EU for the collection, treating and recycling of electronic waste. 

This ensures that the devices are recycled in a resource-saving way represent-
ing no danger to health or the environment.

Fig. 2-2

WEEE-Symbol

The WEEE symbol (see Fig. 2-2 on page 14) on the product or its packaging 
shows that the product must not be disposed of as residual garbage.

The user is obliged to collect the old devices separately and return them to the 
WEEE take-back system for recycling. The WEEE directive concerns all ETAS 
devices but not external cables or batteries.

For more information on the ETAS GmbH Recycling software, contact the ETAS 
sales and service locations.

2.6

CE marking

With the CE mark attached to the product or its packaging, ETAS confirms that 
the product corresponds to the applicable product-specific European Direc-
tives. The CE Declaration of Conformity for the product is available upon 
request.

2.7

RoHS Conformity

2.7.1

European Union

The EU Directive 2011/65/EU limits the use of certain dangerous materials for 
electrical and electronic devices (RoHS conformity). 

This product does not contain any of the restricted substances specified in the 
EU Directive 2011/65/EU or exceeds the maximum concentrations stipulated 
therein. For individual electronic components used in our products, there are 
currently no equivalent alternative substances, which is why we make use of 
the exception 7C-I in Annex III of this Directive.

ETAS confirms that the product corresponds to this directive which is applica-
ble in the European Union.

2.7.2

China

ETAS confirms that the product meets the product-specific applicable guide-
lines of the China RoHS (Management Methods for Controlling Pollution 
Caused by Electronic Information Products Regulation) applicable in China 
with the China RoHS marking affixed to the product or its packaging.

Summary of Contents for FETK-S2.1






































































Reviews: