ES5372.1-B 1 Slot Carrier Board for ES4455.2 and ES4456.2 - User’s Guide
6
Introduction
ETAS
1.1
Properties
The chapter describes the fundamental properties of the ES5372.1-B.
1.1.1
Properties of the ES5372.1-B
The ES5372.1-B is a plug-in card for a LABCAR HiL system to be used in the
ES5300.1-A Housing and in the ES5300.1-B Housing. The ES5372.1-B may be
fitted with the ES4455.2 or the ES4456.2.
The properties of the ES5372.1-B are as follows:
• Plug-in card for a LABCAR HiL system
• Compatibility with the ES5300.1-A Housing and ES5300.1-B Housing
• Slot for an ES4455.2 or an ES4456.2 plug-in card
• 1 slot width for fitting a ES4455.2
• 3 slot width for fitting a ES4456.2
• Calibration of four external loads in a state fitted with the ES4455.2
• Simulation of eight piezo injectors in a state fitted with the ES4456.2
For additional specific properties in the fitted state, please read the ES4455.2
user's guide or the ES4456.2 user's guide.
1.1.2
ES5372.1-B Block Diagram with ES4455.2
The block diagram in Fig. 1-1 on page 7 shows the ES5372.1-B, fitted with an
ES4455.2.
