ES5372.1-B 1 Slot Carrier Board for ES4455.2 and ES4456.2 - User’s Guide
24
Setup, Installation and Fuses
ETAS
Fig. 2-5
Position of the fuses
Tab. 2-1
Specification of the fuses on the ES5372.1-B
Position and specification of fuses on the ES4455.2 and ES4456.2 plug-in cards
are described in the ES4455.2 user's guide or in the ES4456.2 user's guide.
2.3
Installing the ES4456.2 in an ES5372.1-B
The installation of the ES4456.2 may be performed only by ETAS.
Fuse
Type
Specification
Protection of
(voltage)
FU100
NANO2® Slo-Blo®
Fuse 452/454 Series
T5A
-VBAT
FU101
NANO2® Slo-Blo®
Fuse 452/454 Series
not populated
not populated
FU400
NANO2® Slo-Blo®
Fuse 452/454 Series
T3A
12 V
FU401
NANO2® Slo-Blo®
Fuse 452/454 Series
T3A
3,3 V
FU403
NANO2® Slo-Blo®
Fuse 452/454 Series
not populated
not populated
FU404
NANO2® Slo-Blo®
Fuse 452/454 Series
T1.5A
-12 V
WARNING!
Risk of electric shock, fire hazard!
For safety reasons, the assembly of the ES5372.1-B and ES4456.2
may be performed only at ETAS. If you purchased the two products
individually, please contact your ETAS contact person so that the
ES5372.1-B and the ES4456.2 can be returned to ETAS for assembly.
Failure to observe it can lead to an incorrect pin assignment, damage
to the board of the ES4456.2 or short circuits. This causes a risk of
electric shock from high voltages and of fires.
FU401
FU400
FU404
FU403
FU100
FU101
