ETAS ES5372.1-B, User Manual

Page: 18 / 46

ES5372.1-B 1 Slot Carrier Board for ES4455.2 and ES4456.2 - User’s Guide 18
Introduction ETAS
1.6 About this Manual
This manual consists of the following chapters:
• "Introduction" on page 5
This chapter
• "Setup, Installation and Fuses" on page 21
This chapter contains a description of the components of the ES5372.1-B.
It also contains instructions for installation and information about the
fuses.
• "Connections and Plug Connections" on page 31
This section provides a description of the different connections of the
ES5372.1-B.
• "Technical Data and Standards" on page 39
This chapter contains the technical data of the ES5372.1-B and the appli-
cable standards.
• "Ordering Data" on page 41
1.6.1 Working with this Manual
Presentation of Information
All activities to be performed by the user are presented in a "Use Case" format.
That is, the goal to be accomplished is briefly defined in the heading, and the
respective steps required for reaching this goal are then presented in a list. The
presentation looks as follows:
Target Definition
Any advance information...
1. Step 1
Any explanation for step 1...
2. Step 2
Any explanation for step 2...
Any concluding comments...
Specific example:
Creating a New File
Before creating a new file, no other file may be open.
1. Select File → New .
The "Create File" dialog box appears.
2. Enter the name of the new file in the “File name”
field.
The file name may not have more than 8 characters.
3. Click on OK .
The new file is being created and saved under the name you specified. You can
now work with the file.