ES415.1 - User’s Guide
49
ETAS
Getting Started
5.2.7
Attaching ES400 Modules to Other Components Using Cable Fasteners
Fig. 5-12
Openings for Cable Fasteners in ES400 Modules
Every module base has openings for two cable fasteners each on the right- and
left-hand side (see Fig. 5-12 on page 49). Just use cable fasteners to quickly
attach the modules to other components in the test environment in the immedi-
ate proximity of the measuring points.
Attaching ES400 Modules to Other Components Using Cable Fasteners
With this method of attachment, you connect the ES400 module or ES400 mod-
ule blocks to the component using additional cable fasteners inserted through
the openings of the modules. The integrated assembly elements of the module
are not used.
Fastening ES400 Modules on DIN Rails using Cable Fasteners
For this fastening variant, the ES400 module or ES400 module blocks are con-
nected with an ES4xx angle bracket (right) or with an ES4xx angle bracket (left)
using additional cable fasteners inserted through the breakouts of the module.
The integrated assembly elements of the module are not used.
The modules fastened to the ES4xx angle bracket are subsequently attached to
the DIN rail.
Connecting the ES4xx Angle Bracket with the DIN rail
1. Place the ES4xx angle bracket onto the DIN rail.
2. Insert the hooks of the ES4xx angle bracket into the
upper part of the DIN rail.
3. Engage the ES4xx angle bracket in the DIN rail by
pressing on the ES4xx angle bracket or the module.
The module connected with the ES4xx angle
bracket is fastened to the DIN rail.
CAUTION!
When assembling the modules, observe the admissible temperature
range of the cable fasteners used!