ES415.1 - User’s Guide
44
Getting Started
ETAS
Connecting the ES4xx Angle Bracket with the DIN Rail
Connecting the ES4xx Angle Bracket (left) with the DIN rail
1. Place the ES4xx angle bracket onto the DIN rail.
2. Insert the hooks of the ES4xx angle bracket into the
upper part of the DIN rail.
3. Engage the ES4xx angle bracket in the DIN rail by
pressing on the ES4xx angle bracket or the module.
The module connected with the ES4xx angle
bracket is fastened to the DIN rail.
5.2.5
Attaching ES400 Modules to Other Components with Screws
Here, you connect the ES400 module to the component using two additional M3
screws which are screwed into the drill holes of the component. The integrated
assembly elements of the module are not used.
Fig. 5-10
Attaching to Other Components Using Additional Screws
Rules on Attaching the Modules to Other Components
Observe the following rules when connecting the modules as required to other
components:
Note
The two integrated threaded holes in the module are only accessible from the
right-hand side of the module.
You therefore have to screw the other component onto the module from the
right.
Once the module is screwed to the other component, you cannot screw any
further modules to this one.