ES415.1 - User’s Guide
43
ETAS
Getting Started
Connect the Module with the ES4xx Angle Bracket (left)
Connecting the ES400 module with the ES4xx angle bracket (left) requires a
2 mm hex key (minimum length 20 mm).
Connecting the module and the ES4xx Angle Bracket (left):
1. Position the module to the right of the ES4xx angle
bracket (left).
2. Align the integrated assembly elements of the mod-
ule with the bores.
3. Insert the hex key in a hexagon head on the right
side of the module.
4. Screw the parts together by turning the hex key
clockwise to the stop within the module.
Both parts are now mechanically connected on one
side.
5. Insert the hex key in the other hexagon head of the
module.
6. Screw the parts together by turning the hex key
clockwise to the stop within the module.
Both parts are now completely connected mechan-
ically.
Connecting with Additional Modules
Connecting the ES400 module with additional modules requires a 2-mm hex key
(minimum length 20 mm).
Connecting with additional modules:
1. Connect additional modules according to the pro-
cedure described in chapter 5.2.2 on page 37
.
Note
Screw the two parts together without canting the
threads!
Note
Screw the two parts together without canting the
threads!
Note
Additional modules can only be screwed onto the right side of this module, but
not any module blocks.