ES415.1 - User’s Guide
42
Getting Started
ETAS
5.2.4
Attaching ES400 Modules on DIN Rails with the Integrated Assembly Elements
With the integrated assembly elements of the ES400 modules, you can not only
connect the modules with each other, but also with DIN rails.
For this fastening variant, you connect the ES400 module with the DIN rail using
an ES4xx angle bracket (left). The screw connection follows the principle of con-
necting several modules.
Fasten the ES400 modules on DIN rails with the integrated assembly elements
using the following steps:
1. Connect the module with the ES4xx angle bracket
(left).
2. Connect the module with additional modules
(as required).
3. Connect the ES4xx angle bracket with the DIN rail.
Fig. 5-9
Fastening to an ES4xx Angle Bracket (left) using the Integrated
Assembly Elements
Rules on Connecting the Modules on the DIN Rails using the ES4xx Angle Bracket
(left)
To be able to fasten the modules in the desired arrangement with the ES4xx
angle bracket (left) on DIN rails, observe the following rules:
Note
The two integrated assembly elements are accessible only from the right side
of the module and can be rotated with a hex key.
For this reason, the module must always be screwed onto the ES4xx angle
bracket (left) from the right side.
Additional modules can only be screwed onto the right side of this module, but
not any module blocks.