ES415.1 - User’s Guide
11
ETAS
Basic Safety Notices
De-energizing the module
The module does not have an operating voltage switch. The module can be de-
energized as follows:
• Disconnecting the cables from the measurement inputs
and
• Disconnecting the module from the power supply
– Switching off the lab power supply
or
– Disconnecting the module from the lab power supply
Separating device is the lab plug of the power cable or the plug of the
power cable at the connection of the module
or
– Disconnecting the module from the vehicle battery
Separating device is the lab plug of the power cable or the plug of the
power cable at the connection of the module
or
– Disconnecting the vehicle battery.
Cabling
Approved cables:
• Use exclusively ETAS cables at the connections of the module!
• Adhere to the maximum permissible cable lengths
!
• Do not use any damaged cables! Cables may be repaired only by ETAS!
For detailed information about cabling, see the User's Guide of the module.
CAUTION!
Never apply force to insert a plug into a socket.
Ensure that there is no contamination in and on the connection, that
the plug fits the socket, and that you correctly aligned the plugs with
the connection.
CAUTION!
Damage possible to connectors of the modules or the
ES4xx_BRIDGE!
Fasten the two modules with screws to the stop inside the module
without canting them.
CAUTION!
Potential equalization in the vehicle is possible via the shield of
the connecting cables of the modules!
Install the modules only at locations with the same electrical potential
or isolate the modules from the installation location.