ES415.1 - User’s Guide
37
ETAS
Getting Started
Examples for mounting
Examples for mounting using the different possibilities to connect and attach
ES400 modules are:
• Connect ES400 modules with the integrated assembly elements (cascad-
ing)
• Attaching ES400 modules with the integrated assembly elements:
– on DIN rails with ES4xx angle brackets (left)
– on other components
• Attaching ES400 modules with screws:
– on DIN rails with ES4xx angle brackets (right)
– on other components
• Attaching ES400 modules with cable fasteners:
– on DIN rails with ES4xx angle brackets (left)
– on DIN rails with ES4xx angle brackets (right)
– on other components
5.2.2
Connecting Several ES400 Modules Mechanically
You can combine any ES400 modules with each other using the integrated
assembly elements of the ES400 modules.
Here, you connect the ES400 modules using the integrated assembly elements.
Fig. 5-5
Connecting Several ES400 Modules Using the Integrated Assembly
Elements
Rules on Connecting the Modules
Observe the following rules when connecting the modules as required:
Note
The two integrated assembly elements can only be accessed from the right-
hand side of the module and can only be turned using an Allen key.
When connecting the modules, you must therefore always screw the module
on the right to the module on its left.
You can only successively screw additional modules, but not module blocks,
onto the right-hand side of this module block.
When creating module blocks, observe the defined order.