Etac Cross XL, Manual

Page: 33 / 44

32 33
Assembly instructions are always
provided with accessories when they
are supplied by Etac.
11:1 Seat cushion and comfort wedge
It can be cut to the desired depth
either at the front or back edge.
When measuring the length,
ensure that the cushion is properly
positioned between the back tubes
with the rounded corners to the
rear.
The cushion is a standard
model and is not suitable for
users with sitting sores.
11:2 Armrest, detachable, height adjustment
The detachable armrest comes in
two versions, with short or long
armrest guard. The armrest attach-
ment can be fitted in 2 different
heights. In position 1 the height
of the armrest is settable between
19 and 26 cm, and in position 2
(standard) between 24 and 31 cm,
with 1 cm intervals.
Tools: 10 mm spanner,
5 mm Allen key.
The lock lug is used both to set the
height of the armrest and secure
the side guard:
-
Loosen the screw that fas-
tens the lock lug.
- Slide the guard up or down
to the desired height.
- Retighten the lug on the
sideguard.
Tools: 3 mm Allen key.
Never use the armrests to
lift the wheelchair.
If necessary the right armrest can
be fitted on the left side and vice-
versa.
11 Assembly instructions accessories
1
2
A comfort wedge is a useful acces-
sory for the seat cushion. It evens
out the front edge of the seat, giv-
ing even greater seat comfort.
Place the comfort wedge in the
cushion-cover’s inside pocket,
under the cushion.
The arrow on the comfort wedge
should be on the top-side pointing
forwards.
Instructions are also available on our website.
www.etac.com
(!) With 24" low pressure or solid
tyres in pos. C1, the armrest’s
side guard does not cover the
front edge of the rear wheel.