Etac Cross XL, Manual, Page: 25 / 44

24 25
9:4 Continuously angle-adjustable legrest (option)
There are three types of angle adjustable legrest.
Mod. 1: With or without plush covered calf plate which is adjustable
in height, depth and angle. The calf plate can also be mounted as a
knee stop.
(!) See assembly instructions supplied for mounting the calf support.
Mod.2: With foldable calf support which is adjustable in angle,
height and sideways. Calf support in polyurethane.
Mod. 3: With polyamide or plush calf support that is hinged and
angleadjustable for optimum fit against the calf. The calf
support can be fitted at 2 different heights on the legrest
tube. With seat width 35 and 37,5 calf support of polya-
mide can only be used on one side.
Never stand on the footrests as there is a risk of tipping!
When lifting a wheelchair, remove the legrests and lift using the
frame (lower or upper part).
9 Settings: legrests
9:5 Amputee legrest (option)
The amputee legrest is settable in height. It can also be adjusted forwards,
sideways and in angle. It can be used both on the left and right side of the
chair.
- Angle and sideways: loosen the lever under the plate.
- Forwards/backwards: loosen the knobs under the plate.
- Height: use the Allen key provided.
Tools: 4 mm Allen key (provided with the amputee legrest).
Never sit on the amputee leg support.
When lifting the wheelchair, remove the amputee leg support, swing
the other legrest in under the seat (or remove it) and lift using the
frame (lower or upper part).