Etac Cross XL, Manual, Page: 34 / 44

34
11 Assembly instructions accessories
11:3 Padded cover, armrest
The detachable armrests can be supplemented with a padded or gel cover.
The covers are manufactured in dark grey plush, or alternatively black Dar-
tex, and they are washable.
(!) The cover makes the armrest 1,5-2 cm higher.
11:4 Armrest, flip-up, height adjustment
The flip-up armrest comes in two
varieties, height adjustable and
fixed. It is mounted onto the wheel-
chair’s frame and can be flipped
upwards/backwards by pressing the
red lever (A) inwards. Mount the
armrest according to the assembly
instructions supplied.
The armrest height is settable be-
tween
22 and 30 cm with 1 cm intervals.
- Push the red lever to one side
and loosen the screws that
fix the armrest bracket to the
frame.
- Slide the armrest up or down
to the desired height.
- Tighten the screws again.
11:5 Positioning belt
The positioning belt is in two parts, is adjustable in length and has a snap-
lock. It can be mounted either in the backrest joint (A) or in the holes
just in front of the backrest joint (B), above the wheel mounts. Assembly
instructions are supplied with the belt.
(!) Ensure that the user does not slide forwards in the seat as this can
lead to the belt impairing the supply of blood to the hip/waist area.
The belt is to be used only for positioning in the wheelchair.
It must not be used as a substitute for a car safety belt.
We recommend the front position. (B)
It counteracts sliding forward more effectively.
A
Tools: 3 mm
Allen key.
Never use the armrests to
lift the wheelchair.
(!) These armrests cannot
be combined with a cane
holder or with 24" or 22"
rear wheel in position C.
A
B