Etac Cross XL, Manual, Page: 26 / 44

26
9 Settings: legrests
9:6 Height of the footrests
Cross XL is supplied with flip-up footrests, adjustable in height. The footrests
are also settable in angle and depth.
Height Loosen the locking handle (A) on the legrest fully.
Remove the screw (B).
Set the height. Replace the screw and handle. Tighten securely.
Max. length: 51 cm. Min. length: 33 cm.
For outdoor use the footrests should be raised 4-5 cm above the
ground. Never stand on the footrests as there is a risk of tipping!
Make sure the screw head locks in the hexagon hole.
9:7 Angle and depth of the footrests
The footrests can also be adjusted in angle and depth.
Angle Loosen the screws (C) slightly. Adjust to the required position and
tighten again.
Tools: 5 mm Allen key.
Depth The sides of the footrests have different lengths. By changing the left
side for the right they will extend further forwards.
(!) If the depth is altered, the angle must be adjusted.
Right Wrong
C
A
B