Etac Cross XL, Manual

Page: 17 / 44

16 17
7:1 Backrest
The backrest is settable in height and angle and has adjustable backrest up-
holstery.
Risk of tipping: Always check the position of the anti-tips after ad-
justing the backrest.
7:2 Backrest height
The backrest height is continuously settable (See “The chairs possibilities”).
Loosen the screws (A) 2-3 turns to set the height of the backrest.
Ensure that both sides are at the same height by checking against the ruler
(B) on the back of the back tube. Tighten the screws securely.
Tools: Allen key 5 mm.
7:3 Backrest angle
The backrest angle is infinitely variable (See “The chairs possibilities”).
The angle is adjusted using the nut on the inside of the rear wheel attach-
ments.
- Loosen the nut on one of the back tubes, set the desired angle and
tighten the nut firmly again.
- Repeat the procedure on the other side.
Tools: 13 mm ring spanner.
(!) Check that the angle is the same on both sides by comparing the
distance between the back tube and the armrest guard.
Risk of tipping: Always check the positioning of the anti-tips when
changing the backrest angle.
7 Settings backrest mod. 2