–
Do not reel the power cord around the appliance to increase product lifecycle.
–
The power supply cord must not be damaged by sharp or hot subjects, by naked flame
and it must not be immersed into water or bent over sharp edges. Never put it on hot
surfaces and do not let it hang over the edge of a table or a worktop. Hitting, stumbling
over or pulling the power cord, e.g. by children, can result in tilting over or drawing the
appliance down and cause serious injury!
–
If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
–
Use this appliance only for its intended purpose described in these instructions for use!
Never use the appliance for any other purpose.
–
WARNING:
There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
–
The producer does not undertake any responsibility for damage or injuries caused by
improper use of the appliance and the accessories (e.g.
food deterioration, injuries,
fire
) and its guarantee does not cover the appliance in the case of failure to comply with
the safety warnings above.
II. FEATURES OF THE DEVICE
(pic. 1)
A – propulsion unit
A1 – control panel (turn on / off / reverse / Quick Clean)
A2 – supply cord
B – juicing container
B1 – feeding necks
B5 – press worm
B2 – cover
B6 – sieve (2 pcs)
B3 – stamper
B7 – rotary spatula
B4 – juicer attachment body closing
B8 – pulp slit
(it activates and deactivates the safety lock)
B9 – juice opening
C – juice container
D – pulp container
E – cleaning brush
Control panel
This is a touch control panel. Therefore, no pressure needs to be applied to touch the
buttons (symbols) displayed. After correct assembling and connecting the appliance to the
mains,
STATUS
indicator and
STOP
button will light, and a signal (1 beep) will sound.
START
button: the appliance is on.
STOP
button: the appliance is off.
REVERSE
button: Pressing and holding this button will put the appliance into
operation (the spiral feeder will start rotating in opposite
direction); releasing the button will switch off the appliance.
STATUS
indicator
– Blinking (flashing) in red – components are unsecured or incorrectly assembled.
– Permanent green light – components are correctly assembled and secured.
If the appliance does not operate, and
STOP
button’s backlight and
STATUS
indicator are
blinking (in red), it means that the lid
B4
is not put on and properly secured.
GB
24
/ 47
