background image

Description

9

Explanation of the maintenance switch

The maintenance switch on the boiler is needed for
performing maintenance with the aid of the 

 [Main-

tenance] function in the ETAtouch control system. This
displays the individual maintenance steps on the boiler
screen. 

With this variant the heating mode is stopped, but
the boiler remains on at the mains switch. So that

all drives are disconnected, the safety chain of the
boiler is disrupted with the maintenance switch. The
screen will display a message when it is time to actuate
the maintenance switch.

Fig. 2-1: Maintenance switch

The maintenance switch is marked with the 
symbol and has two settings.

"1" = regular operation

This is the standard position of the maintenance
switch. The boiler can execute heating mode in this
position.

"0" = maintenance mode

In this position, all drives are disconnected to
perform maintenance. The circuit boards,
however, are still live.

Display maintenance steps on the screen

With this boiler, the maintenance steps can also be
displayed on the ETAtouch control system screen. The
required activities will be explained to you step-by-step
and supplemented with detailed graphics. Each
maintenance is saved and the details can be viewed at
any time. So you can maintain a long-term overview of
the maintenance carried out. Of course, the
maintenance can also be carried out using the service
guide, without the support of the ETAtouch control
system.

To access maintenance, switch to settings in the boiler
function block (

 [Settings] button) and then select

the function 

 [Maintenance]. 

Fig. 2-2: Overview (example)

You can also access this overview by pressing
the maintenance switch. Also when the message

appears that maintenance of the boiler is required.

In the overview the different maintenance intervals are
listed in the upper area. This includes the maintenance
already carried out. With the 

 button, information

about the selected maintenance is displayed.
Maintenance that you can carry out as an end
customer is labelled with the 

 symbol. All others are

reserved for specialists and require authorisation.

Press the 

 button to start the maintenance. The

individual steps are displayed on the screen. You can
switch to the next or the previous screen respectively
with the arrow keys on the left and right side of the
screen.

Fig. 2-3: Maintenance step (example)

Summary of Contents for PelletsCompact 20-32 kW













































































Reviews: