www.esylux.com
7 13
/
PRESENCE DETECTOR PD-C360i/24 KNX ECO (EP10425844)
GB
6 • TELEGRAM INTERVAL – BRIGHTNESS/STATE
Options: 1 min. - 30 min. (up/down menu)
The presence detector transmits, in preset telegram time intervals,
the measured room brightness (2 byte, Object 9).
The status report acts as a cyclical check of the sensor (Object 10).
[1...30 min.]
Default setting: 1 min.
7 • MODIFICATOR LIGHT VALUE
Due to reflection, the light value measured by the presence detector will
always be smaller than the light value on the work surface below.
The difference varies greatly and is dependent on local conditions.
Dark surfaces cause a low level of reflection.
Light, matte surfaces cause a medium level of reflection.
Light surfaces cause a high level of reflection.
To enable optimal adjustment of the threshold or set value, a separate
modificator can each be set.
The value can be set to any number within the range:
factor 1 - 10
[1...10]
Default setting: 5
8 • lOCK
Options for change in state after lock:
- No reaction (outputs remain the same as before lock)
- Switch off (outputs send OFF telegram)
- Switch on (outputs send ON telegram)
Default setting: No reaction
