The app menu <Settings>
Doc. no. BA012497_02
96 / 107
GB
Position yourself in the area of the room that will be illuminated by
the lights assigned to channel 1.
Slide the top slide controller until the required brightness is reached.
If you are unsure whether the set brightness is too low, check the
brightness using a lux meter.
Position yourself in the area of the room that will be illuminated by
the lights assigned to channel 2.
Slide the top slide controller until the required brightness is reached.
If you are unsure whether the set brightness is too low, check the
brightness using a lux meter.
Tap <Save>.
After the light target values have been received, the lights will go
off briefly.
The target light values are now saved.
If lights without light sensors are in use on one channel, the
man-
ual setting
process has one restriction: Although you can still use
the slide controllers to set and save different brightnesses for each
channel, the lights will still produce the same brightness.
The reason: For lights without light sensors, brightness measure-
ment is only performed by the DALI detector. This means there is
only one measured brightness value that constant light manage-
ment uses for all channels.
Limitation for
lights without
light sensors