The remote control menu <Programming>
Doc. no. BA012497_02
55 / 107
GB
confirm the selection with the
button.
4.
Select the <Orient. time mode> menu item and confirm your selection
with the
button.
5. Select the
button to choose the menu item <Until time> and
confirm the selection with the
button.
6. End programming mode by pressing the
button.
The duration of the orientation light can now be set with the menu
items <Orient. light from h> and <Orient. light to h>.
For information on setting the desired start and end time, see page 56 on-
wards.
8.3.7 Orient. light in min.
The <Orient. in min.> menu item sets the orientation light duration to a
value of between 0 to 240 minutes.
If the orientation light duration is set to zero minutes, the orienta-
tion light is disabled.
Prerequisites:
• The setting <in minutes> is enabled in the menu item <Orient. time
mode>. For more information, see Chapter “Orient. time mode” page
Setting the orientation light duration in minutes:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Select the
button to choose the menu item <Orient. light in min.>
and confirm the selection with the
button.
5. Use the
or
buttons to set the required time in minutes and
confirm the selection with the
button.
6. End programming mode by pressing the
button.
The duration for the orientation light is now set in minutes.
All Channels
Orient. light in min.
Orient. light from h
Orient. light to h
Full automatic
Semi automatic
Bat ok LS
ELC
Enter number
of minutes