Overview of operating modes
Doc. no. BA012497_02
33 / 107
GB
5.2 Manually triggered operating modes
Other than these operating modes that the Light Control Box can automat-
ically switch between, there are other operating modes that are triggered
manually or by certain events:
Override mode
Action
• Illumination that differs from normal oper-
ation mode owing to manual interventions
such as changes to brightness or activation
of light scenes. Manual changes are tem-
porary and are not stored.
Note: Off delay time settings for normal
operation mode also apply to override
mode.
Trigger for
override mode
• Command via the button, remote control or
app during normal operation
• Motion detection during the off warning
time if override mode was active before the
off warning.
Duration
• For such time that motion is detected,
plus the set off delay time.
Subsequent operating
mode
• Off warning mode, as after normal opera-
tion mode.
Programming mode
Trigger
• Remote control button or app command to
start programming mode.
Action
• Saves the settings for lighting conditions,
off delay time times, etc. transmitted by
remote control or app.
Subsequent operating
mode
• When
fully automatic
is activated:
Energy-saving mode, transition to normal
operation mode following presence detec-
tion.
• When
semi-automatic
is activated:
Energy-saving mode.
Trigger for subsequent
operating mode
• Remote control button for ending program-
ming mode or confirming a setting changed
via app.
• Five minutes of inactivity (programming
mode then ends automatically).