The remote control menu <Programming>
Doc. no. BA012497_02
66 / 107
GB
8.10 Reset editor
If you change settings in the scene editor, you can undo these changes
using the
Reset editor
function. The values in the scene editor are then reset
to the default settings.
The
Reset editor
function does not change the Light Control Box
settings. The function simply restores the default scene editor
values locally in the remote control.
Restoring the original scene editor values:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Select the
button to choose the menu item <Reset editor> and
confirm the selection with the
button.
The values in the scene matrix are reset to the default values.
8.11 Sensitivity
The DALI detectors connected to the Light Control Box are precise and
highly sensitive presence detectors. In rare cases, interferences such as hot
air currents may cause erroneous presence detection. The
Sensitivity
func-
tion adjusts the sensitivity of the presence detector.
You can set the sensitivity to:
<sensitive>, <normal>, <reduced> and <sharply reduced>.
By default, the presence detector is set to <sensitive>.
Setting the sensitivity of the presence detector:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <Sensitivity> and
confirm the selection with the
button.
4. Use the
or
buttons to set the required sensitivity and confirm
the selection with the
button.
5. End programming mode by pressing the
button.
The sensitivity of the presence detector is based on the set value.
Settings
values