The remote control menu <Programming>
Doc. no. BA012497_02
62 / 107
GB
ed manually if the off delay time in normal operation or override mode has
elapsed.
Pulse mode k:
If this function is enabled, the DALI switch switches devices
such as automatic stairwell timers or current impulse relays on with an im-
pulse. The impulse is repeated regularly for as long as movement is detect-
ed.
Setting the mode for DALI switch 1 or 2:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <DALI switch> and
confirm the selection with the
button.
4. Select the
button to choose the menu item <DS1 mode> or <DS2
mode> and confirm the selection with the
button.
5. Select the
or
button to choose the desired mode and confirm
the selection with the
button.
6. End programming mode by pressing the
button.
The selected DALI switch now operates in the set mode.
8.7 Scene editor
The <Scene editor> menu item saves the brightness as a percentage of the
maximum brightness for a light scene. You can also set whether a DALI
switch should be switched on or off with the scene.
Setting a scene:
The change is made using an example from scene 3 on channel 2.
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Select the
button to choose the menu item <Scene editor> and
confirm the selection with the
button.
The sub-menu shows a matrix with the default light values for
each channel and scene. You can customise these values.
3. In the matrix, use the
button to navigate to the column <Sc3>
and the
button to choose line <C2>. Confirm your selection with
Sc1 Sc2 Sc3 Sc4
CH1 % 10 100
30
70
CH2 % 10 100 30 70
CH3 % 10 100 30 70
CH4 % 10 100 30 70
DS1
Off On Off On
DS2
Off On Off On
Bat ok LS
ELC