DX4 Product Manual
Document Version: V1.05
(Jan, 2021)
© 2020 Trio Motion Technology Ltd. All right reserved.
iii
Storage Precautions
CAUTION
⚫
Follow all instructions on the packages, and never place an excessive load on the
product during storage.
⚫
Never install or store the product in any of the following locations.
⚫
Locations that are subject to direct sunlight
⚫
Locations that are subject to ambient temperatures that exceed product specifications
⚫
Locations that are subject to relative humidity that exceed product specifications
⚫
Locations that are subject to corrosive or flammable gases
⚫
Locations that are subject to dust, salts, or iron powder
⚫
Locations that are subject to water, oil, or chemicals
⚫
Locations that are subject to vibration or shock that exceeds product specifications
⚫
Locations that are subject to radiation
Installation Precautions
CAUTION
⚫
Install the Drive in a control cabinet that provides fire and electrical protection.
⚫
Install the Drive and Motor in a way that will support their mass.
⚫
Never install or store the product in any of the following locations.
⚫
Locations that are subject to direct sunlight
⚫
Locations that are subject to ambient temperatures that exceed product specifications
⚫
Locations that are subject to relative humidity that exceed product specifications
⚫
Locations that are subject to corrosive or flammable gases
⚫
Locations that are subject to dust, salts, or iron powder
⚫
Locations that are subject to water, oil, or chemicals
⚫
Locations that are subject to vibration or shock that exceeds product specifications
⚫
Locations that are subject to radiation
⚫
Never allow any foreign matter to enter a Drive or a Motor with a Cooling Fan.
⚫
Never cover the outlet from cooling fan of Drive or Motor.
⚫
Never step on or place a heavy object on the product.
⚫
Install the Drive in the specified orientation.
⚫
Provide the specified clearances between the Drive and the control cabinet as well
as with other devices.
Wiring Precautions
CAUTION
⚫
Never bypass the electromagnetic contactor in the wiring between the Drive and the
Motor.
⚫
Firmly connect the power terminal to the Motor terminal.
⚫
Provide an adequate air gap around the Drive installation.
⚫
Use shielded twisted-pair cables or screened unshielded multi-twisted-pair cables for
I/O Signal Cables and Encoder Cables.
⚫
The wiring length of the command input line is up to 3 meters, and the wiring length
of the encoder is up to 20 meters.
⚫
Minimize the frequency that the power supply is turned ON and OFF.