ESTeem 195C, User Manual, Page: 29 / 75

CHAPTER 5
ETHERNET APPLICATIONS
Revised: 15 Feb 2017 5-4 ESTeem Models 195MHC
Wizard View
The Wizard View will ask questions about the IP
addresses being used in the wireless network. If
an IP address is not identified in the
Route/Append table, the ESTeem 195M/H/C
will NOT process that address. When selecting
the Route/Append tab, press the Wizard View
radial button and Figure 4 will be displayed.
This simplified entry method asks for the
remote ESTeem address (Destination) and the
remote IP address range. If repeaters are used,
check the box next to the repeater and enter
the IP address of the ESTeem 195M/H/C.
Programming the Master Site and using Figure
3 ‐ Remote 1, enter the Destination IP address
as 172.16.10.20 (remote ESTeem address) and
the IP address range will be a single entry so
enter 172.16.10.21 through 172.16.10.21
(Figure 5). Press the Next Route button to
continue.
Figure 4: Route/Append Wizard View
Figure 5: Example Master Site Entry for Remote 1