ESTeem 195C, User Manual, Page: 17 / 75

CHAPTER 3
EXAMPLE APPLICATIONS
Revised: 10 Oct 2017 3-5 ESTeem Models 195MHC
Programming Examples
Once the mode of operation for the ESTeem has been determined, you
are now ready to program the Model 195C, 195M or 195H for use.
ESTeem has created a simplified programming utility call the 195
Narrow Band Configuration Tool. This configuration utility is a
component of the Discovery Suite and will be used in all the following
programming examples.
Finding ESTeem 195M/H/C with Discovery
Each of the example applications will use the 195 Narrowband Configuration Utility to
program the ESTeem 195M/H/C. The modem can also be programmed by changing
individual software commands any serial interface (RS-232, RS-422 or RS-485) or
Telnet to the Ethernet port. Please refer to Appendix-A (Software Commands) for a
complete list of software commands and instructions on configuration.
1. Verify the basic hardware configuration from Chapter 2 and open the 195
Narrowband Configuration Utility (Figure 5). Press the Discover EST Modems button to continue.
2. The ESTeem 195M/H/C will be displayed (Figure 5). If the ESTeem 195M/H/C is not on the same IP subnet as the computer,
double click on the IP address and Netmask to make the necessary changes. Press the Apply Changes button when
complete.
3. If changes were made to the IP address you will need to press the
Discover EST Modems button again to show the changes.
Right-mouse click on the ESTeem 195M/H/C and select Configure Radio button to begin programming.
Technical Tip : The 195 Narrowband Configuration
Tool communicates with the 195M/H/C through the
Ethernet interface. If Ethernet or RS-422 (Shared
ports with the Ethernet programming port) are the
data interface for the wireless link, configure the
195M/H/C as shown below first. Once configured
and reset change to the correct data cable.
Technical Tip : If your computer is
configured for DHCP and not
attached to the network, you will
need to assign a static IP address to
program the 195M/H/C.
Figure 5: ESTeem Discovery Utility
Figure 6: Opening Radio Configuration Software