12
Assembly (Cont.)
WARNING!
Make sure you do not overtighten the stem pillar bolt, which could damage the
handlebar stem pillar assembly and result in possible injury to the rider.
Step 4: stem and handlebar assembly
1. Insert the stem pillar into the fork tube up to the minimum insertion line indicated
on the stem pillar.
2. Face the handlebar stem forward, directly in line with the front wheel (Fig. 8).
Then tighten both stem pillar bolts to a torque requirement of or 17–19 N·m
(12–15 ft.lb.).
3. The handlebar is semi-assembled on the stem. Loosen the clamp bolts, adjust
the handlebar position, then tighten the clamp bolts to 17–19 N·m (15 ft.lb.).
WARNING:
If you can move it forward or backward, the clamp bolts are not
tight enough.
Fig. 8
Stem pillar bolt Stem
Stem pillar
Clamp bolts
12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: ESTC27M PRODUCT CODE: 704459 04/2021