6
General Safety Instructions (Cont.)
• Maximum rider weight:
100kg (including rear carrier 15kg loading; excluding
the bicycle weight)
• This bike is intended to be used on urban roads.
It is not intended for use on
unpaved ground or for off-road use. Failure to follow these warnings could result
in a fall or accident and permanently and irreversibly damage the condition of
your power-assisted bicycle.
• Night-time operation:
We do NOT recommend riding your bike at night. If you
have an emergency that makes it necessary to ride at right, have proper lights
and reflectors. Do NOT ride at night without a headlight, taillight, a white front
reflector, a red rear reflector and yellow wheel reflectors.
• On and off-road operation:
Avoid the following hazards: drain grates, potholes,
ruts, soft road edges, gravel and leaves, especially when they are wet.
• Maintenance schedule:
We strongly recommend to establish and respect a
periodic maintenance schedule, which will be determined by the frequency and
length of your rides, your style of riding, as well as the terrain on which you most
often ride.
• E-bike maitenance:
Before maintenance or cleaning, make sure the e-bike is
disconnected from the charger.
WARNING: Never leave the battery charging without supervision!
• Before first use
: The battery is 60% pre-charged. As it is a smart lithium
battery, no special action needs to be taken when first charging. We provide a
dedicated smart charger with a charge protection function.
• Appropriate environment:
Do not use the e-bike (battery) in the rain, in a
waterlogged area or in temperatures outside the appropriate temperature range
from -10°C to 50°C. The best temperature range is between 0°C and 40°C, too
cold or too hot temperatures will affect the battery efficiency and life.
6
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: ESTC27M PRODUCT CODE: 704459 04/2021
• Recommended torque requirements
in Newton metres (N·m) for the following:
(A)
Front axle nuts: 15-25 N·m
(B)
Back axle nuts: 20-30 N·m
(C)
Handlebar clamp nut/bolt: 8-12 N·m
(D)
Handlebar stem expander bolt: 3
0
N·m
(E)
Seat pillar clamp
:
quick release
(F)
Brake cable anchor bolt: 1.5-4 N·m
(G)
Brake mounting bolt: 8-12 N·m
(H)
Seat clamp nuts: 12 N·m
(I)
Crank attachment systems: 40-60 N·m
(J) Pedal: 35-40 N·m
