19
Operation
Turning on/off
• Long-press the POWER [
] button to turn on the e-bike (display). The display
will show the approximate battery status and pedal assistance modes. When the
LED is switched on, the integrated USB port will be powered.
• Long-press the POWER [
] button to turn off the e-bike (display). It will turn off
automatically if there is no operation for 10 minutes since switching on.
Electric-assisted mode (pedal assistance)
Power assistance is triggered when you pedal forward and it stops when you stop
pedalling. In other words, power assistance happens as long as you pedal. You do
not need to pedal hard, just apply a light force to the pedals continuously to maintain
the current flow. When you apply one of the brakes, power assistance will stop
automatically, allowing the e-bike to slow down and stop. Power assistance will turn
itself off when the e-bike has reached the maximum speed of 25km/h.
You must turn on the battery to use the e-bike in electric-assisted mode. Once
the
e-bike is powered on, you can use the PLUS / MINUS [
/
] buttons to change
the pedal assistance level from the
five levels available. The indicators will change
with the level selected.
• Short-press the PLUS [
] button to shift up.
• Short-press the MINUS [
] button to shift down.
Using 6km/h EV mode
Once the e-bike is powered on, you can switch to 6km/h EV mode to gain initial
speed before riding the e-bike.
• Long-press the PLUS [
] button to start 6km/h EV mode, then release the
button. The e-bike will start with a speed of 6km/h.
• Long-press the PLUS [
] button again to turn off 6km/h EV mode.
USB charging
The display must be turned OFF when inserting a USB cable. Otherwise the display
may turn off automatically to prevent a power surge. Depending on the type of USB
cable you are using, the charging current may be limited to below 140mA, in which
case the USB indicator will not illuminate on the display; it will still charge, but not
indicate that it is charging. If the charging current is higher than 300mA, the display
will turn off automatically.
NOTE:
The USB port has a maximum output current of 300mA. We therefore
recommend you only use it for emergency charging of your device.
Instructions (Cont.)
19
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: ESTC27M PRODUCT CODE: 704459 04/2021
